<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I added a util function `set_hovered` to change the hovered state of a
row from tables in `egui_extras` which matches the already present
`set_selected` function.
* [x] I have followed the instructions in the PR template
`egui::Table` has a weirdly specific default `max_scroll_height` set to
800.0. This means that even with `vscroll(true)` and `auto_shrink([_,
false])`, the table will not expend to the full available height. This
PR changes this value to `f32::INFINITY`. This makes it consistent with
the corresponding default value of `ScrollArea::max_size.y`, which is
where that `max_scroll_height` ends up being used.
This makes the sizing pass of an `egui_table` ensure the table uses as
little width as possible.
Subsequently, it will redistribute all non-resizable columns on the
available space, so that a table better follow the parent container as
it is resized.
I also added `table.reset()` for forgetting the current column widths.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
All the other crates in egui have serde as an optional dependency -
which is great! But sadly egui_extras unconditionally includes it, which
adds a bunch of code to stuff that may not care for it. This PR gates
serde support behind a new `serde` feature.
This is a breaking change; if that's undesirable then we can add it as a
default feature instead, though that wouldn't match any of the other
crates.
* Closes https://github.com/emilk/egui/issues/4535
This should improve the auto-sizing of columns when nesting expanding
widgets (e.g. `Separator`), or centered or justified layouts.
* Closes#4534
This PR:
- Introduces `Ui::stack()`, which returns the `UiStack` structure
providing information on the current `Ui` hierarchy.
- **BREAKING**: `Ui::new()` now takes a `UiStackInfo` argument, which is
used to populate some of this `Ui`'s `UiStack`'s fields.
- **BREAKING**: `Ui::child_ui()` and `Ui::child_ui_with_id_source()` now
take an `Option<UiStackInfo>` argument, which is used to populate some
of the children `Ui`'s `UiStack`'s fields.
- New `Area::kind()` builder function, to set the `UiStackKind` value of
the `Area`'s `Ui`.
- Adds a (minimalistic) demo to egui demo (in the "Misc Demos" window).
- Adds a more thorough `test_ui_stack` test/playground demo.
TODO:
- [x] benchmarks
- [x] add example to demo
Future work:
- Add `UiStackKind` and related support for more container (e.g.
`CollapsingHeader`, etc.)
- Add a tag/property system that would allow adding arbitrary data to a
stack node. This data could then be queried by nested `Ui`s. Probably
needed for #3284.
- Add support to track columnar layouts.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Was reading the docs and noticed a typo.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes <https://github.com/emilk/egui/issues/THE_RELEVANT_ISSUE>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Related to #3482
Not sure what the "best practice" is, to me it seems like one should
import from "the original location" if possible, but now it should at
least be possible to not re-export ahash without any breakage in the
egui code base (but possibly in projects using egui, so one should
probably deprecate it if one would like to go that path). It also seems
like epaint re-exports ahash.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Inspired by:
44d65f41ac/Cargo.toml (L65)
I took the liberty of removing that comment since I *think* that I got
all "relevant" ones (showing up more than once, sort of).
Removes `egui_assert` etc and replaces it with normal `debug_assert`
calls.
Previously you could opt-in to more runtime checks using feature flags.
Now these extra runtime checks are always enabled for debug builds.
You are most likely to encounter them if you use negative sizes or NaNs
or other similar bugs.
These usually indicate bugs in user space.
Motivation: I want to replace `cargo-cranky` with workspace lints, first
available in Rust 1.74.
However, `cargo doc` would hange on `wgpu` and `wgpu-core` on 1.74 and
1.75… so now we're on 1.76.
I think this is fine - when 1.78 is released next week we're still two
versions behind the bleeding edge.
…and the branch name is just wrong 🤦
I added a handfull of lines to allow for the red highlight on weekends
in `DatePickerPopup` to be disabled.
I tried to follow the rules, but I've never done any kind of PR before,
and I'm also not sure if this is at all the kind of thing that is wanted
at the moment. If it is not, I'm happy to just have this removed. Just a
tiny little addition I would find useful.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Simply allows date picker buttons to show other formats than `%Y-%m-%d`,
while keeping that as default to not break compatibility.
I'm not that experienced with Rust, so I was unsure whether you'd prefer
`&'a str` rather than a `String`, let me know if I should change that.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Remove the leading slash from the path if the target OS is Windows.
This is because Windows paths are not supposed to start with a slash.
For example, `file:///C:/path/to/file` is a valid URI, but
`/C:/path/to/file` is not a valid path.
* Use the input URI consistently as the cache key.
Currently, the cache key is inconsistently set as either the path or the
URI, while the forget key is always the URI. This inconsistency should
be resolved.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Each cell in a table now has a `Ui` with a unique `Id` based on the row
and column.
This avoids Id-clashes, e.g. when putting a `CollapsingHeader` in a
table cell.
* Closes https://github.com/emilk/egui/issues/3936
* Closes https://github.com/emilk/egui/issues/3923
* Closes https://github.com/emilk/egui/pull/4058
The interaction code is now done at the start of the frame, using stored
`WidgetRect`s from the previous frame.
The intention is that the new interaction code should be more accurate,
making it easier to hit widgets, and better respecting the rules of
overlapping widgets.
There is a new `style::Interaction::interact_radius` controlling how far
away from a widget the cursor can be and still hit it. This helps big
fat fingers hit small widgets on touch screens.
This PR adds a new `Context::read_response` which lets you read the
`Response` of a `Widget` _before_ you create the widget. This can be
used for styling, or for reading the result of an interaction early (to
prevent frame-delay) for a widget you add late (so it is on top of other
widgets).
# ⚠️ BREAKING CHANGES
`Memory::dragged_id`, `Memory::set_dragged_id` etc have been moved to
`Context`.
The semantics for `Context::dragged_id` is slightly different: a widget
is not considered dragged until egui it is sure this is not a
click-in-progress. For a widget that is only sensitive to drags, that is
right away, but for widgets sensitive to both clicks and drags it is not
until the mouse has moved a certain distance.
# TODO
* [x] Fix panel resizing
* [x] Fix scroll hover weirdness
* [x] Fix Resize widget
* [x] Fix drag-and-drop
* [x] Test all of egui_demo_app
* [x] Change `is_dragging` API
* [x] Consistent naming of start/stop or begin/end drag
* [x] Test `egui_tiles`
* [x] Test Rerun
* [x] Document
* [x] Document breaking changes in PR description
* [x] Test one final time
# Saving for a later PR
* [ ] Fix https://github.com/emilk/egui/issues/4047
* [ ] Specify what the response order for e.g. `ui.horizontal` is
I think both these can be fixed if each `Ui` registers themselves as a
`WidgetRect`, with the possibility to interact with it later, as if the
interaction was under all widgets on top of it.
There was no way to customize this as ScrollArea gets created inside
Table widget, this exposes the functionality, so scroll bars on tables
can be customized.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
At crates\egui_extras\src\layout.rs :
Allocate allocation_rect instead of max_rect.
Go back from this:
```
let response = self.ui.allocate_rect(max_rect, self.sense);
let response = response.with_new_rect(allocation_rect);
return (used_rect, response)
```
to this:
```
let response = self.ui.allocate_rect(allocation_rect, self.sense);
return (used_rect, response)
```
In order to allocate the
Closes <https://github.com/emilk/egui/issues/3956>.
* Closes https://github.com/emilk/egui/issues/3941
Workspace dependencies can be annoying.
If you don't set them to `default-features=false`, then you cannot opt
out of their default features anywhere else, and get warnings if you
try.
So you set `default-features=false`, and then you need to manually opt
in to the default features everywhere else.
Or, as in my case, don't.
I don't have the energy to do this tonight, so I'll just revert.
Added error messages when scaling to invalid sizes instead of panicking
through unwrap, returning to previous behavior.
Closes <https://github.com/emilk/egui/issues/3825>.
Addis Webb
Antoine Beyeler
Emil Ernerfeldt
JustFrederik
Nathan Adams
Onè
Oscar Gustafsson
hiyosilver
zaaarf
Varphone Wong
Richard Hozák
njust
Ivan
Romet Tagobert