* [x] I have followed the instructions in the PR template
Splitting this out from the Parley work as requested. This removes
`FontImage` and makes the font atlas use a `ColorImage`. It converts
alpha to coverage at glyph-drawing time, not at delta-upload time.
This doesn't do much now, but will allow for color emoji rendering once
we start using Parley.
I've changed things around so that we pass in `text_alpha_to_coverage`
to the `Fonts` the same way we do with `pixels_per_point` and
`max_texture_side`, reusing the existing code to check if the setting
differs and recreating the font atlas if so. I'm not quite sure why this
wasn't done in the first place.
I've left `ImageData` as an enum for now, in case we want to add support
for more texture pixel formats in the future (which I personally think
would be worthwhile). If you'd like, I can just remove that enum
entirely.
This fixes bugs related to how an `Image` follows the size of an SVG.
We track the "source size" of each image, i.e. the original width/height
of the SVG, which can be different from whatever it was rasterized as.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Did not test on platforms other than my phone, but I can't imagine it
causing problems. AFAIK if highp isn't supported then `precision highp
float;` needs to still not cause the program to fail to link/compile or
anything; it should just silently use some other precision.
* Fixes https://github.com/emilk/egui/issues/4268 for me but I only
tested it on a native Android app and I don't know whether backends
other than glow are affected.
* [x] I have followed the instructions in the PR template (but the
change is trivial so I'm just doing it from the master branch)
Before:
After:
Enabled the `missing_assert_message` lint
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Lucas Meurer <lucasmeurer96@gmail.com>
Hey! I am not sure if this is something that's been considered before
and decided against (I couldn't find any PR's or issues).
This change removes the internal profiling macros in library crates and
the `puffin` feature and replaces it with similar functions in the
[profiling](https://github.com/aclysma/profiling) crate. This crate
provides a layer of abstraction over various profiler instrumentation
crates and allows library users to pick their favorite (supported)
profiler.
An additional benefit for puffin users is that dependencies of egui are
included in the instrumentation output too (mainly wgpu which uses the
profiling crate), so more details might be available when profiling.
A breaking change is that instead of using the `puffin` feature on egui,
users that want to profile the crate with puffin instead have to enable
the `profile-with-puffin` feature on the profiling crate. Similarly they
could instead choose to use `profile-with-tracy` etc.
I tried to add a 'tracy' feature to egui_demo_app in order to showcase ,
however the /scripts/check.sh currently breaks on mutually exclusive
features (which this introduces), so I decided against including it for
the initial PR. I'm happy to iterate more on this if there is interest
in taking this PR though.
Screenshot showing the additional info for wgpu now available when using
puffin
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [X] I have followed the instructions in the PR template
---------
Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
eframe has features for selecting between x11 and wayland. eframe does
not forward the features to glutin. This makes glutin always compile
with both backends enabled. This change forwards the feature. This
allows users of egui to compile less dependencies when they only need
one of x11, wayland.
To understand this change, read the glutin Cargo.toml [1] and the glutin
build.rs [2]. You always have to enable glutin's glx feature with the
x11 feature. The other default features (egl, wgl) stay enabled. This is
intentional so that everything continues to work as before. We could
further minimize when egl and wgl are enabled, but that is not part of
this change. There is little reason to do so because those feature
already only add dependencies when you compile glutin for the right
platform (for example wgl on windows).
[1]
https://github.com/rust-windowing/glutin/blob/v0.32.1/glutin/Cargo.toml
[2]
https://github.com/rust-windowing/glutin/blob/v0.32.1/glutin/build.rs
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Adds support for mipmaps in the `glow` backend.
Should be possible to implement for `wgpu` in the future as well, but
requires a custom compute kernel.
Before making this PR, I did take notice of a similar PR,
https://github.com/emilk/egui/pull/4833, but as it appears to be
abandoned, I decided to make this PR.
**Missing**
One of the checks doesn't pass as wgpu still uses glow `0.13.1`
```shell
cargo deny --all-features --log-level error --target aarch64-apple-darwin check
```
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
You can see this feature in action
[here](https://docs.rs/sysinfo/latest/src/sysinfo/common/system.rs.html#46)
or on any of dtolnay's crates and many others. I found myself going
through your project code recently on docs.rs and I was a bit sad I
couldn't have this feature enabled. This should fix it at next release.
:)
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I removed (I hope so) all wildcard imports I found.
For me on my pc this improved the build time:
- for egui -5s
- for eframe -12s
* [x] I have followed the instructions in the PR template
This updates winit to 0.30.5.
https://github.com/emilk/egui/pull/4849 Had to pin the version to
0.30.2, as a Winit patch changed the behavior of selecting a theme.
Winit 0.30.5 reverts this, so we could stick with `window.theme()`, but
the newly added `ActiveEventLoop::system_theme` is more like what egui
wants anyway, as individual windows can have theme overrides.
Also bump `smithay-clipboard` to prevent some now duplicate
dependencies.
* Some initial progress towards #4490
This PR just moves `Theme` and the "follow system theme" settings to
egui and adds `RawInput.system_theme`.
A follow-up PR can then introduce the two separate `dark_mode_style` and
`light_mode_style` fields on `Options`.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
### Breaking changes
The options `follow_system_theme` and `default_theme` has been moved
from `eframe` into `egui::Options`, settable with `ctx.options_mut`
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Since #4849, running `./scripts/check.sh` fails with:
```
...
error[E0277]: the trait bound `ActiveEventLoop: raw_window_handle::borrowed::HasDisplayHandle` is not satisfied
--> crates/egui_glow/src/winit.rs:43:13
|
43 | event_loop,
| ^^^^^^^^^^ the trait `raw_window_handle::borrowed::HasDisplayHandle` is not implemented for `ActiveEventLoop`
|
= help: the following other types implement trait `raw_window_handle::borrowed::HasDisplayHandle`:
raw_window_handle::borrowed::DisplayHandle<'a>
&H
&mut H
= note: required for the cast from `&ActiveEventLoop` to `&dyn raw_window_handle::borrowed::HasDisplayHandle`
```
This PR adds the missing `rwh_06` to the winit dependency (in
egui-glow).
* [x] I have followed the instructions in the PR template
* Closes https://github.com/emilk/egui/issues/1918
* Closes https://github.com/emilk/egui/issues/4437
* Closes https://github.com/emilk/egui/issues/4709
* [x] I have followed the instructions in the PR template
Hiya,
I need new winit for a specific fix for a android_native_actvity. There
are already two PRs, but both don't seem to have a lot of movement, or
are entirely complete:
https://github.com/emilk/egui/pull/4466
Seems to have gone stale & is missing some bits.
https://github.com/emilk/egui/pull/4702
Also seems stale (if less so), and is missing a refactor to
run_on_demand. I also *think* the accesskit integration has a mistake
and can't be enabled. I've marked them as a co-author on this as I
started from this branch. (I think! Haven't done that on git before...).
Sorry for the wall of text but just dumping some details / thoughts
here:
- There's an issue with creating child windows in winit 0.30.1 and up on
macOS. The multiple_viewports, "create immediate viewport" example
crashes on anything later 0.30.1, with a stack overflow in unsafe code.
I've create [a winit
issue](https://github.com/rust-windowing/winit/issues/3800), it *might*
already be fixed in 0.31.0 but I can't test as 0.31 will likely require
another refactoring. For now I have just pinned things to 0.30.0 exatly.
- Winit has deprecated run_on_demand, instead requiring the
ApplicationHandler interface. In 0.31.0 run_on_demand is removed. I've
refactored both the integration and the WinitApp trait to follow this
pattern. I've left user_events a bit more opaque, as it seems 0.31.0 is
doing a rework of UserEvents too.
- I've used the new lazy init approach for access kit from this branch
https://github.com/mwcampbell/egui/tree/accesskit-new-lazy-init and
marked Matt as co-author, thanks Matt!
- There was very similair but not quite the same code for run_and_return
and run_and_exit. I've merged them, but looking at the github issues
graveyard it seems vey finnicky. I *hope* this is more robust than
before but it's a bit scary.
- when receiving new_events this also used to check the redraw timing
dictionary. That doesn't seem necesarry so left this out, but that is a
slight behaviour change?
- I have reeneabled serial_windows on macOS. I wondered whether it was
fixed after this PR and does seem to be! However, even before this PR it
seems to work, so maybe winit has sorted things out before that...
Windows also works fine now without the extra hack.
- I've done a very basic test of AccessKit on Windows and screen reader
seems ok but I'm really not knowleadgable enough to say whether it's all
good or not.
- I've tested cargo tests & all examples on Windows & macOS, and ran a
basic Android app. Still, testing native platforms is wel... hard so if
anyone can test linux / iOs / older mac versions / windows 10 would
probably be a good idea!
- For consistencys sake I've made all event like functions in WinitApp
return a `Result<EventResult>`. There's quite a bit of Ok-wrapping now,
maybe too annoying? Not sure.
Thank you for having a look!
# Tested on
* [x] macOS
* [x] Windows
* [x] Wayland (thanks [SiebenCorgie](https://github.com/SiebenCorgie))
* [x] X11 (thanks
[crumblingstatue](https://github.com/crumblingstatue)!,
[SiebenCorgie](https://github.com/SiebenCorgie))
# TODO
* [x] Fix "follow system theme" not working on initial startup (winit
issue, pinning to 0.30.2 for now).
* [x] Fix `request_repaint_after`
---------
Co-authored-by: mwcampbell <mattcampbell@pobox.com>
Co-authored-by: j-axa <josef.axa@gmail.com>
Co-authored-by: DataTriny <datatriny@gmail.com>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Related to #3482
Not sure what the "best practice" is, to me it seems like one should
import from "the original location" if possible, but now it should at
least be possible to not re-export ahash without any breakage in the
egui code base (but possibly in projects using egui, so one should
probably deprecate it if one would like to go that path). It also seems
like epaint re-exports ahash.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Inspired by:
44d65f41ac/Cargo.toml (L65)
I took the liberty of removing that comment since I *think* that I got
all "relevant" ones (showing up more than once, sort of).
### Motivation
We want to offer our users a context menu with `Cut`, `Copy` and `Paste`
actions. `Paste` is not possible out of the box.
### Changes
This PR adds `ViewportCommand::RequestCut`,
`ViewportCommand::RequestCopy` and `ViewportCommand::RequestPaste`. They
are routed and handled after the example of
`ViewportCommand::Screenshot` and result in the same code being executed
as when the user uses `CTRL+V` style keyboard commands.
### Reasoning
In our last release we used an instance of
`egui_winit:📋:Clipboard` in order to get the `Paste`
functionality.
However Linux users on Wayland complained about broken clipboard
interaction (https://github.com/mikedilger/gossip/issues/617). After a
while of digging I could not find the issue although I have found
references to problems with multiple clipboards per handle before
(https://gitlab.gnome.org/GNOME/mutter/-/issues/1250) but I compared
mutter with weston and the problem occured on both.
So to solve this I set out to extend egui to access the clipboard
instance already present in egui_winit. Since there was no trivial way
to reach the instance of `egui_winit::State` I felt the best approach
was to follow the logic of the new `ViewportCommand::Screenshot`.
### Variations
It could make sense to make the introduced `enum ActionRequested` a part
of crates/egui/src/viewport.rs and to then wrap them into one single
`ViewportCommand::ActionRequest(ActionRequested)`.
### Example
```Rust
let mut text = String::new();
let response = ui.text_edit_singleline(&mut text);
if ui.button("Paste").clicked() {
response.request_focus();
ui.ctx().send_viewport_cmd(ViewportCommand::RequestPaste);
}
```
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
These are the latest versions of memoffset and arboard.
The changes to egui_glow/pure_glow allow downstream crates to not depend
on rwh 0.5, which is only needed for pure_glow (and other projects that
use glutin)
Thanks for your time & work
This solves a GL_INVALID_ENUM error common on Windows (occurs on my
Windows 10 machine with a GTX 1070 Ti).
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
ARB_framebuffer_SRGB is entirely unsupported on WebGL, hence why latest
egui (master branch) doesn't try to disable SRGB framebuffers on wasm32
and this PR's code doesn't even check for ARB_framebuffer_sRGB on
wasm32.
* For <servo/servo#30782>
Emil Ernerfeldt
valadaptive
Alexander Nadeau
Nicolas
Lucas Meurer
Ted de Munnik
Samson
Valentin
Christofer Nolander
Guillaume Gomez
Arthur Brussee
Tau Gärtli
Arthur Brussee
Jonas Wagner
rustbasic
Oscar Gustafsson
Simon Frankau
bu5hm4nn
Magnus Larsen
Magnus Larsen