Previously, `Harness::run` just called `Harness::step` 3 times. If that
wasn't enough, tests would often call run multiple times so all
animations would finish properly.
Also, I introduced `HarnessBuilder::with_step_dt` to customize with how
big of a dt each frame is called. I set the default to 1.0 / 6.0 (~6fps)
so we don't waste cpu in tests waiting on animations.
`HarnessBuilder::max_steps` allows us to control how many steps
`Harness::run` should run before panicing.
The default is 6, so we run for up to 1.0 logical seconds (six frames at
6 fps), which should be enough to finish most animations.
Turns out a lot of snapshots where rendered before fully shown and had a
light opacity, those are now fixed.
* [x] I have followed the instructions in the PR template
* Part of https://github.com/emilk/egui/issues/4019
`Frame` now includes the width of the stroke as part of its size. From
the new docs:
### `Frame` docs
The total (outer) size of a frame is `content_size + inner_margin +
2*stroke.width + outer_margin`.
Everything within the stroke is filled with the fill color (if any).
```text
+-----------------^-------------------------------------- -+
| | outer_margin |
| +------------v----^------------------------------+ |
| | | stroke width | |
| | +------------v---^---------------------+ | |
| | | | inner_margin | | |
| | | +-----------v----------------+ | | |
| | | | ^ | | | |
| | | | | | | | |
| | | |<------ content_size ------>| | | |
| | | | | | | | |
| | | | v | | | |
| | | +------- content_rect -------+ | | |
| | | | | |
| | +-------------fill_rect ---------------+ | |
| | | |
| +----------------- widget_rect ------------------+ |
| |
+---------------------- outer_rect ------------------------+
```
The four rectangles, from inside to outside, are:
* `content_rect`: the rectangle that is made available to the inner
[`Ui`] or widget.
* `fill_rect`: the rectangle that is filled with the fill color (inside
the stroke, if any).
* `widget_rect`: is the interactive part of the widget (what sense
clicks etc).
* `outer_rect`: what is allocated in the outer [`Ui`], and is what is
returned by [`Response::rect`].
### Notes
This required rewriting a lot of the layout code for `egui::Window`,
which was a massive pain. But now the window margin and stroke width is
properly accounted for everywhere.
This adds `WidgetType::Image` and correctly sets it in the Image widget.
This allows us to query for images in kittest tests and tells accesskit
that a node is an image.
It also adds `Image::alt_text` to set a text that will be shown if the
image fails to load and will be read via screen readers. This also
allows us to query images by label in kittest.
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes https://github.com/emilk/egui/issues/5423
New output is actionable
```
failures:
---- demo::demo_app_windows::tests::demos_should_match_snapshot stdout ----
thread 'demo::demo_app_windows::tests::demos_should_match_snapshot' panicked at crates/egui_demo_lib/src/demo/demo_app_windows.rs:433:9:
Errors: [
"'demos/Code Example' Image size did not match snapshot. Expected: (402, 574), Actual: (415, 574).
Run `UPDATE_SNAPSHOTS=1 cargo test` to update the snapshots.",
]
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
failures:
demo::demo_app_windows::tests::demos_should_match_snapshot
```
- fixes https://github.com/emilk/egui/issues/5359
For the test I added a `Harness::press_key` function. We should
eventually add these to kittest, probably via a trait one can implement
for the `Harness` but for now this should do.
The allows us to pass any state to the ui closure. While it is possible
to just store state in the closure itself, accessing that state after
the harness was created to e.g. read or modify it would require interior
mutability. With this change there are new `Harness::new_state`,
`Harness::run_state`, ... methods that allow passing state on each run.
This builds on top of #5301, which should be merged first
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
This adds a `Harness::new_ui`, which accepts a Ui closure and shows the
ui in a central panel. One big benefit is that this allows us to add a
fit_contents method that can run the ui closure with a sizing pass and
resize the "screen" based on the content size.
I also used this to add a snapshot test for the rendering_test at
different scales.
This adds `egui_kittest::try_image_snapshot_options` and
`egui_kittest::image_snapshot_options`, as well as
`Harness::wgpu_snapshot_options` and
`Harness::try_wgpu_snapshot_options`
* [X] I have followed the instructions in the PR template
This should hopefully make it easier for egui contributors and
egui_kittest users to understand the snapshot tests
* [X] I have followed the instructions in the PR template
- closes#3491
- closes#3926
This adds a testing library to egui based on
[kittest](https://github.com/rerun-io/kittest). Kittest is a new
[AccessKit](https://github.com/AccessKit/accesskit/)-based testing
library. The api is inspired by the js
[testing-library](https://testing-library.com/) where the idea is also
to query the dom based on accessibility attributes.
We made kittest with egui in mind but it should work with any rust gui
framework with AccessKit support.
It currently has support for:
- running the egui app, frame by frame
- building the AccessKit tree
- ergonomic queries via kittest
- via e.g. get_by_name, get_by_role
- simulating events based on the accesskit node id
- creating arbitrary events based on Harness::input_mut
- rendering screenshots via wgpu
- snapshot tests with these screenshots
A simple test looks like this:
```rust
fn main() {
let mut checked = false;
let app = |ctx: &Context| {
CentralPanel::default().show(ctx, |ui| {
ui.checkbox(&mut checked, "Check me!");
});
};
let mut harness = Harness::builder().with_size(egui::Vec2::new(200.0, 100.0)).build(app);
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::False));
checkbox.click();
harness.run();
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::True));
// You can even render the ui and do image snapshot tests
#[cfg(all(feature = "wgpu", feature = "snapshot"))]
egui_kittest::image_snapshot(&egui_kittest::wgpu::TestRenderer::new().render(&harness), "readme_example");
}
```
~Since getting wgpu to run in ci is a hassle, I'm taking another shot at
creating a software renderer for egui (ideally without a huge dependency
like skia)~ (this didn't work as well as I hoped and it turns out in CI
you can just run tests on a mac runner which comes with a real GPU)
Here is a example of a failed snapshot test in ci, it will say which
snapshot failed and upload an artifact with the before / after and diff
images:
https://github.com/emilk/egui/actions/runs/11183049487/job/31090724606?pr=5166
Andreas Reich
TÖRÖK Attila
Emil Ernerfeldt
lucasmerlin