Enabled the `missing_assert_message` lint
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Lucas Meurer <lucasmeurer96@gmail.com>
Hey! I am not sure if this is something that's been considered before
and decided against (I couldn't find any PR's or issues).
This change removes the internal profiling macros in library crates and
the `puffin` feature and replaces it with similar functions in the
[profiling](https://github.com/aclysma/profiling) crate. This crate
provides a layer of abstraction over various profiler instrumentation
crates and allows library users to pick their favorite (supported)
profiler.
An additional benefit for puffin users is that dependencies of egui are
included in the instrumentation output too (mainly wgpu which uses the
profiling crate), so more details might be available when profiling.
A breaking change is that instead of using the `puffin` feature on egui,
users that want to profile the crate with puffin instead have to enable
the `profile-with-puffin` feature on the profiling crate. Similarly they
could instead choose to use `profile-with-tracy` etc.
I tried to add a 'tracy' feature to egui_demo_app in order to showcase ,
however the /scripts/check.sh currently breaks on mutually exclusive
features (which this introduces), so I decided against including it for
the initial PR. I'm happy to iterate more on this if there is interest
in taking this PR though.
Screenshot showing the additional info for wgpu now available when using
puffin
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [X] I have followed the instructions in the PR template
---------
Signed-off-by: sagudev <16504129+sagudev@users.noreply.github.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Adds support for mipmaps in the `glow` backend.
Should be possible to implement for `wgpu` in the future as well, but
requires a custom compute kernel.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I removed (I hope so) all wildcard imports I found.
For me on my pc this improved the build time:
- for egui -5s
- for eframe -12s
* [x] I have followed the instructions in the PR template
This updates winit to 0.30.5.
https://github.com/emilk/egui/pull/4849 Had to pin the version to
0.30.2, as a Winit patch changed the behavior of selecting a theme.
Winit 0.30.5 reverts this, so we could stick with `window.theme()`, but
the newly added `ActiveEventLoop::system_theme` is more like what egui
wants anyway, as individual windows can have theme overrides.
Also bump `smithay-clipboard` to prevent some now duplicate
dependencies.
* Some initial progress towards #4490
This PR just moves `Theme` and the "follow system theme" settings to
egui and adds `RawInput.system_theme`.
A follow-up PR can then introduce the two separate `dark_mode_style` and
`light_mode_style` fields on `Options`.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
### Breaking changes
The options `follow_system_theme` and `default_theme` has been moved
from `eframe` into `egui::Options`, settable with `ctx.options_mut`
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes https://github.com/emilk/egui/issues/1918
* Closes https://github.com/emilk/egui/issues/4437
* Closes https://github.com/emilk/egui/issues/4709
* [x] I have followed the instructions in the PR template
Hiya,
I need new winit for a specific fix for a android_native_actvity. There
are already two PRs, but both don't seem to have a lot of movement, or
are entirely complete:
https://github.com/emilk/egui/pull/4466
Seems to have gone stale & is missing some bits.
https://github.com/emilk/egui/pull/4702
Also seems stale (if less so), and is missing a refactor to
run_on_demand. I also *think* the accesskit integration has a mistake
and can't be enabled. I've marked them as a co-author on this as I
started from this branch. (I think! Haven't done that on git before...).
Sorry for the wall of text but just dumping some details / thoughts
here:
- There's an issue with creating child windows in winit 0.30.1 and up on
macOS. The multiple_viewports, "create immediate viewport" example
crashes on anything later 0.30.1, with a stack overflow in unsafe code.
I've create [a winit
issue](https://github.com/rust-windowing/winit/issues/3800), it *might*
already be fixed in 0.31.0 but I can't test as 0.31 will likely require
another refactoring. For now I have just pinned things to 0.30.0 exatly.
- Winit has deprecated run_on_demand, instead requiring the
ApplicationHandler interface. In 0.31.0 run_on_demand is removed. I've
refactored both the integration and the WinitApp trait to follow this
pattern. I've left user_events a bit more opaque, as it seems 0.31.0 is
doing a rework of UserEvents too.
- I've used the new lazy init approach for access kit from this branch
https://github.com/mwcampbell/egui/tree/accesskit-new-lazy-init and
marked Matt as co-author, thanks Matt!
- There was very similair but not quite the same code for run_and_return
and run_and_exit. I've merged them, but looking at the github issues
graveyard it seems vey finnicky. I *hope* this is more robust than
before but it's a bit scary.
- when receiving new_events this also used to check the redraw timing
dictionary. That doesn't seem necesarry so left this out, but that is a
slight behaviour change?
- I have reeneabled serial_windows on macOS. I wondered whether it was
fixed after this PR and does seem to be! However, even before this PR it
seems to work, so maybe winit has sorted things out before that...
Windows also works fine now without the extra hack.
- I've done a very basic test of AccessKit on Windows and screen reader
seems ok but I'm really not knowleadgable enough to say whether it's all
good or not.
- I've tested cargo tests & all examples on Windows & macOS, and ran a
basic Android app. Still, testing native platforms is wel... hard so if
anyone can test linux / iOs / older mac versions / windows 10 would
probably be a good idea!
- For consistencys sake I've made all event like functions in WinitApp
return a `Result<EventResult>`. There's quite a bit of Ok-wrapping now,
maybe too annoying? Not sure.
Thank you for having a look!
# Tested on
* [x] macOS
* [x] Windows
* [x] Wayland (thanks [SiebenCorgie](https://github.com/SiebenCorgie))
* [x] X11 (thanks
[crumblingstatue](https://github.com/crumblingstatue)!,
[SiebenCorgie](https://github.com/SiebenCorgie))
# TODO
* [x] Fix "follow system theme" not working on initial startup (winit
issue, pinning to 0.30.2 for now).
* [x] Fix `request_repaint_after`
---------
Co-authored-by: mwcampbell <mattcampbell@pobox.com>
Co-authored-by: j-axa <josef.axa@gmail.com>
Co-authored-by: DataTriny <datatriny@gmail.com>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Related to #3482
Not sure what the "best practice" is, to me it seems like one should
import from "the original location" if possible, but now it should at
least be possible to not re-export ahash without any breakage in the
egui code base (but possibly in projects using egui, so one should
probably deprecate it if one would like to go that path). It also seems
like epaint re-exports ahash.
### Motivation
We want to offer our users a context menu with `Cut`, `Copy` and `Paste`
actions. `Paste` is not possible out of the box.
### Changes
This PR adds `ViewportCommand::RequestCut`,
`ViewportCommand::RequestCopy` and `ViewportCommand::RequestPaste`. They
are routed and handled after the example of
`ViewportCommand::Screenshot` and result in the same code being executed
as when the user uses `CTRL+V` style keyboard commands.
### Reasoning
In our last release we used an instance of
`egui_winit:📋:Clipboard` in order to get the `Paste`
functionality.
However Linux users on Wayland complained about broken clipboard
interaction (https://github.com/mikedilger/gossip/issues/617). After a
while of digging I could not find the issue although I have found
references to problems with multiple clipboards per handle before
(https://gitlab.gnome.org/GNOME/mutter/-/issues/1250) but I compared
mutter with weston and the problem occured on both.
So to solve this I set out to extend egui to access the clipboard
instance already present in egui_winit. Since there was no trivial way
to reach the instance of `egui_winit::State` I felt the best approach
was to follow the logic of the new `ViewportCommand::Screenshot`.
### Variations
It could make sense to make the introduced `enum ActionRequested` a part
of crates/egui/src/viewport.rs and to then wrap them into one single
`ViewportCommand::ActionRequest(ActionRequested)`.
### Example
```Rust
let mut text = String::new();
let response = ui.text_edit_singleline(&mut text);
if ui.button("Paste").clicked() {
response.request_focus();
ui.ctx().send_viewport_cmd(ViewportCommand::RequestPaste);
}
```
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
This solves a GL_INVALID_ENUM error common on Windows (occurs on my
Windows 10 machine with a GTX 1070 Ti).
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
ARB_framebuffer_SRGB is entirely unsupported on WebGL, hence why latest
egui (master branch) doesn't try to disable SRGB framebuffers on wasm32
and this PR's code doesn't even check for ARB_framebuffer_sRGB on
wasm32.
* For <servo/servo#30782>
Exposes support in both glow and wgpu for texture wrap modes
This would be breaking for manual creations of TextureOptions but would
work with the current TextureOptions::NEAREST and LINEAR without change,
keeping those clamp to edge
I wasn't sure how best to expose the options to the user and added
consts for LINEAR_REPEAT LINEAR_MIRRORED_REPEAT NEAREST_REPEAT
NEAREST_MIRRORED_REPEAT
This does not include wrap mode clamp to border as it worked fine with
glow but with wgpu it panics due to Features
Features(ADDRESS_MODE_CLAMP_TO_BORDER) are required but not enabled on
the device, and I thought it was probably best not to try to enable that
feature, but happy to include that functionality also if that is okay to
be toggled
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
It required some ugly code in `egui-winit` in order to fix this without
breaking sem-ver (I want this to land in a 0.24.1 patch release). I'll
clean up in time for 0.25.
There is still a font rendering bug when using immediate viewports
across multiple viewports, but that's harder to fix.
* Fixes https://github.com/rerun-io/rerun/issues/4297
* tested against a very hasty and incomplete port of egui/trunk, found
[here](https://github.com/rerun-io/rerun/tree/andreas/experimental-egui-trunk)
In rare cases in can happen that the viewport returned by
`PaintCallbackInfo` is outside the bounds of the screen.
for at least [wgpu/webgpu in
particular](https://www.w3.org/TR/webgpu/#dom-gpurenderpassencoder-setviewport)
this is invalid usage, other backends might be affected as well.
Since this happened due to a float rounding error (in one repro case I
had I got (width==1126.5625) + (offset=715.4376) = 1842.0001 for a
resolution of 1842) I decided to do away with fractional values on the
viewport alltogether. They _technically_ make sense since a viewport is
only specifying the NDC to pixel coordinate conversion, but practically
this may lead to surprising sub-sampling issues.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes https://github.com/emilk/egui/issues/3602
You can now zoom any egui app by pressing Cmd+Plus, Cmd+Minus or Cmd+0,
just like in a browser. This will change the current `zoom_factor`
(default 1.0) which is persisted in the egui memory, and is the same for
all viewports.
You can turn off the keyboard shortcuts with `ctx.options_mut(|o|
o.zoom_with_keyboard = false);`
`zoom_factor` can also be explicitly read/written with
`ctx.zoom_factor()` and `ctx.set_zoom_factor()`.
This redefines `pixels_per_point` as `zoom_factor *
native_pixels_per_point`, where `native_pixels_per_point` is whatever is
the native scale factor for the monitor that the current viewport is in.
This adds some complexity to the interaction with winit, since we need
to know the current `zoom_factor` in a lot of places, because all egui
IO is done in ui points. I'm pretty sure this PR fixes a bunch of subtle
bugs though that used to be in this code.
`egui::gui_zoom::zoom_with_keyboard_shortcuts` is now gone, and is no
longer needed, as this is now the default behavior.
`Context::set_pixels_per_point` is still there, but it is recommended
you use `Context::set_zoom_factor` instead.
This is required for Rust 1.72 (for unknown reasons; see
https://github.com/emilk/egui/pull/3595), but also for updating to glow
0.13, where the `glow::Context` is not longer `Sync+Send`
Introduced in the recent multi-viewports work, we accidentally recreated
the wgpu surfaces every frame. This is now fixed.
I found this while improving the profiling of `eframe`
* Part of https://github.com/emilk/egui/issues/3556
## In short
You now almost never need to use `eframe::Frame` - instead use
`ui.input(|i| i.viewport())` for information about the current viewport
(native window), and use `ctx.send_viewport_cmd` to modify it.
## In detail
This PR removes most commands from `eframe::Frame`, and replaces them
with `ViewportCommand`.
So `frame.close()` becomes
`ctx.send_viewport_cmd(ViewportCommand::Close)`, etc.
`frame.info().window_info` is now also gone, replaced with `ui.input(|i|
i.viewport())`.
`frame.info().native_pixels_per_point` is replaced with `ui.input(|i|
i.raw.native_pixels_per_point)`.
`RawInput` now contains one `ViewportInfo` for each viewport.
Screenshots are taken with
`ctx.send_viewport_cmd(ViewportCommand::Screenshots)` and are returned
in `egui::Event` which you can check with:
``` ust
ui.input(|i| {
for event in &i.raw.events {
if let egui::Event::Screenshot { viewport_id, image } = event {
// handle it here
}
}
});
```
### Motivation
You no longer need to pass around the `&eframe::Frame` everywhere.
This also opens the door for other integrations to use the same API of
`ViewportCommand`s.
* Closes#1044
---
(new PR description written by @emilk)
## Overview
This PR introduces the concept of `Viewports`, which on the native
eframe backend corresponds to native OS windows.
You can spawn a new viewport using `Context::show_viewport` and
`Cotext::show_viewport_immediate`.
These needs to be called every frame the viewport should be visible.
This is implemented by the native `eframe` backend, but not the web one.
## Viewport classes
The viewports form a tree of parent-child relationships.
There are different classes of viewports.
### Root vieport
The root viewport is the original viewport, and cannot be closed without
closing the application.
### Deferred viewports
These are created with `Context::show_viewport`.
Deferred viewports take a closure that is called by the integration at a
later time, perhaps multiple times.
Deferred viewports are repainted independenantly of the parent viewport.
This means communication with them need to done via channels, or
`Arc/Mutex`.
This is the most performant type of child viewport, though a bit more
cumbersome to work with compared to immediate viewports.
### Immediate viewports
These are created with `Context::show_viewport_immediate`.
Immediate viewports take a `FnOnce` closure, similar to other egui
functions, and is called immediately. This makes communication with them
much simpler than with deferred viewports, but this simplicity comes at
a cost: whenever tha parent viewports needs to be repainted, so will the
child viewport, and vice versa. This means that if you have `N`
viewports you are poentially doing `N` times as much CPU work. However,
if all your viewports are showing animations, and thus are repainting
constantly anyway, this doesn't matter.
In short: immediate viewports are simpler to use, but can waste a lot of
CPU time.
### Embedded viewports
These are not real, independenant viewports, but is a fallback mode for
when the integration does not support real viewports. In your callback
is called with `ViewportClass::Embedded` it means you need to create an
`egui::Window` to wrap your ui in, which will then be embedded in the
parent viewport, unable to escape it.
## Using the viewports
Only one viewport is active at any one time, identified wth
`Context::viewport_id`.
You can send commands to other viewports using
`Context::send_viewport_command_to`.
There is an example in
<https://github.com/emilk/egui/tree/master/examples/multiple_viewports/src/main.rs>.
## For integrations
There are several changes relevant to integrations.
* There is a [`crate::RawInput::viewport`] with information about the
current viewport.
* The repaint callback set by `Context::set_request_repaint_callback`
now points to which viewport should be repainted.
* `Context::run` now returns a list of viewports in `FullOutput` which
should result in their own independant windows
* There is a new `Context::set_immediate_viewport_renderer` for setting
up the immediate viewport integration
* If you support viewports, you need to call
`Context::set_embed_viewports(false)`, or all new viewports will be
embedded (the default behavior).
## Future work
* Make it easy to wrap child viewports in the same chrome as
`egui::Window`
* Automatically show embedded viewports using `egui::Window`
* Use the new `ViewportBuilder` in `eframe::NativeOptions`
* Automatically position new viewport windows (they currently cover each
other)
* Add a `Context` method for listing all existing viewports
Find more at https://github.com/emilk/egui/issues/3556
---
<details>
<summary>
Outdated PR description by @konkitoman
</summary>
## Inspiration
- Godot because the app always work desktop or single_window because of
embedding
- Dear ImGui viewport system
## What is a Viewport
A Viewport is a egui isolated component!
Can be used by the egui integration to create native windows!
When you create a Viewport is possible that the backend do not supports
that!
So you need to check if the Viewport was created or you are in the
normal egui context!
This is how you can do that:
```rust
if ctx.viewport_id() != ctx.parent_viewport_id() {
// In here you add the code for the viewport context, like
egui::CentralPanel::default().show(ctx, |ui|{
ui.label("This is in a native window!");
});
}else{
// In here you add the code for when viewport cannot be created!
// You cannot use CentralPanel in here because you will override the app CentralPanel
egui::Window::new("Virtual Viewport").show(ctx, |ui|{
ui.label("This is without a native window!\nThis is in a embedded viewport");
});
}
```
This PR do not support for drag and drop between Viewports!
After this PR is accepted i will begin work to intregrate the Viewport
system in `egui::Window`!
The `egui::Window` i want to behave the same on desktop and web
The `egui::Window` will be like Godot Window
## Changes and new
These are only public structs and functions!
<details>
<summary>
## New
</summary>
- `egui::ViewportId`
- `egui::ViewportBuilder`
This is like winit WindowBuilder
- `egui::ViewportCommand`
With this you can set any winit property on a viewport, when is a native
window!
- `egui::Context::new`
- `egui::Context::create_viewport`
- `egui::Context::create_viewport_sync`
- `egui::Context::viewport_id`
- `egui::Context::parent_viewport_id`
- `egui::Context::viewport_id_pair`
- `egui::Context::set_render_sync_callback`
- `egui::Context::is_desktop`
- `egui::Context::force_embedding`
- `egui::Context::set_force_embedding`
- `egui::Context::viewport_command`
- `egui::Context::send_viewport_command_to`
- `egui::Context::input_for`
- `egui::Context::input_mut_for`
- `egui::Context::frame_nr_for`
- `egui::Context::request_repaint_for`
- `egui::Context::request_repaint_after_for`
- `egui::Context::requested_repaint_last_frame`
- `egui::Context::requested_repaint_last_frame_for`
- `egui::Context::requested_repaint`
- `egui::Context::requested_repaint_for`
- `egui::Context::inner_rect`
- `egui::Context::outer_rect`
- `egui::InputState::inner_rect`
- `egui::InputState::outer_rect`
- `egui::WindowEvent`
</details>
<details>
<summary>
## Changes
</summary>
- `egui::Context::run`
Now needs the viewport that we want to render!
- `egui::Context::begin_frame`
Now needs the viewport that we want to render!
- `egui::Context::tessellate`
Now needs the viewport that we want to render!
- `egui::FullOutput`
```diff
- repaint_after
+ viewports
+ viewport_commands
```
- `egui::RawInput`
```diff
+ inner_rect
+ outer_rect
```
- `egui::Event`
```diff
+ WindowEvent
```
</details>
### Async Viewport
Async means that is independent from other viewports!
Is created by `egui::Context::create_viewport`
To be used you will need to wrap your state in `Arc<RwLock<T>>`
Look at viewports example to understand how to use it!
### Sync Viewport
Sync means that is dependent on his parent!
Is created by `egui::Context::create_viewport_sync`
This will pause the parent then render itself the resumes his parent!
#### ⚠️ This currently will make the fps/2 for every sync
viewport
### Common
#### ⚠️ Attention
You will need to do this when you render your content
```rust
ctx.create_viewport(ViewportBuilder::new("Simple Viewport"), | ctx | {
let content = |ui: &mut egui::Ui|{
ui.label("Content");
};
// This will make the content a popup if cannot create a native window
if ctx.viewport_id() != ctx.parent_viewport_id() {
egui::CentralPanel::default().show(ctx, content);
} else {
egui::Area::new("Simple Viewport").show(ctx, |ui| {
egui::Frame::popup(ui.style()).show(ui, content);
});
};
});
````
## What you need to know as egui user
### If you are using eframe
You don't need to change anything!
### If you have a manual implementation
Now `egui::run` or `egui::begin` and `egui::tessellate` will need the
current viewport id!
You cannot create a `ViewportId` only `ViewportId::MAIN`
If you make a single window app you will set the viewport id to be
`egui::ViewportId::MAIN` or see the `examples/pure_glow`
If you want to have multiples window support look at `crates/eframe`
glow or wgpu implementations!
## If you want to try this
- cargo run -p viewports
## This before was wanted to change
This will probably be in feature PR's
### egui::Window
To create a native window when embedded was set to false
You can try that in viewports example before:
[78a0ae8](78a0ae879e)
### egui popups, context_menu, tooltip
To be a native window
</details>
---------
Co-authored-by: Konkitoman <konkitoman@users.noreply.github.com>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Co-authored-by: Pablo Sichert <mail@pablosichert.com>
* Imoprove docs for callback shapes
* Improve docs for loader traits
* Use snake_case for feature `all_loaders`
* Make loaders publix
* Slightly better error message on image load failure
* Improve image loading error messages
* Use `bytes://` schema for included bytes loader
* Try user loaders first
* Move `image_loading_spinners` to `Visuals`
* Unify and simplify code
* Make the main text of `Button` optional
This largely makes ImageButton obsolete
* Fix docstrings
* Better docs
* typos
* Use the more explicit `egui_extras::install_image_loaders`
* Simplify `Image::paint_at` function
* Add puffin profile scopes to the startup and running of eframe
* puffin_profiler example: start puffin right away
* cargo format let-else statements
* More profile scopes
* Add some `#[inline]`
* Standardize puffin profile scope definitions
* standardize again
* Silence warning when puffin is disabled
* Log warning instead of error when failing to decode RON in storage
* New web demo
* Clean up some warn/error logging
* Avoid deadlock that could happen on crash
* Log errors using console.warn, because console.error can cause crashes
* Use patched version of wasm-bindgen-cli, allowing >2GB memory
* New web demo
* Replace tracing crate with log
It's just so much simpler to use
* Add `bacon wasm` job
* eframe: add a WebLogger for piping log events to the web console
* use glutin-winit for glow context creation
* added some tracing for easier debugging of glutin problems
* fmt
* add more debug logs
* more tracing
* fallback egl instead of prefer egl
* update pure glow example to use glutin_winit
* add more logging. ignore vsync option if not supported
* cranky lint
* add some logging for easier debugging
* drop window after glutin surface
* small changes based on pr review
* build fix
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Clear color values are not explicitely sent to the rendering backend as-is.
Previously, converting from Color32 to Rgba caused an srgb->linear conversion. This conversion is incorrect if the backbuffer doesn't perform automatic conversion from linear->srgb (lack of this conversion is generally what egui assumes!).
* fill in pr numbers in changelog
* Epi comment fix
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Color32 comment fix
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* move changelog line
* rename fix
* use backticks in doc
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
The Vivante GPU on many STM32MP1 based boards does not support sRGB
as an internal format.
Introduce a check for sRGB support and default to `RGBA8` internal format
if not supported.
Additionally the STM32MP1 needs to be checked for `GL_ARB_vertex_array_object`
Closes#1991
* Bug fix: reset repaint countdown when we pass it
* eframe: debug-print what winit event caused a repaint
* egui-winit: don't repaint when only moving window
* fix docstring
Nicolas
Ted de Munnik
Samson
Christofer Nolander
Arthur Brussee
Tau Gärtli
Arthur Brussee
Jonas Wagner
rustbasic
Oscar Gustafsson
Simon Frankau
Emil Ernerfeldt
bu5hm4nn
Magnus Larsen
Dan Lock
Fredrik Fornwall
Sebastian Urban
Andreas Reich
Konkitoman
amfaber
Red Artist
Adia Robbie
Luke Jones