* Closes <https://github.com/emilk/egui/issues/7397>
* [X] I have followed the instructions in the PR template
I do admit I got a peak NixOS `RequestDeviceError` and deemed it
entirely not worth it to think about that.
https://github.com/emilk/egui/pull/5411 broke rotation of multi-line
`TextShape`s because `PlacedRow::pos` was no longer being rotated, so
let's rotate it.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Co-authored-by: Lucas Meurer <hi@lucasmerlin.me>
## What
(written by @emilk)
When editing long text (thousands of line), egui would previously
re-layout the entire text on each edit. This could be slow.
With this PR, we instead split the text into paragraphs (split on `\n`)
and then cache each such paragraph. When editing text then, only the
changed paragraph needs to be laid out again.
Still, there is overhead from splitting the text, hashing each
paragraph, and then joining the results, so the runtime complexity is
still O(N).
In our benchmark, editing a 2000 line string goes from ~8ms to ~300 ms,
a speedup of ~25x.
In the future, we could also consider laying out each paragraph in
parallel, to speed up the initial layout of the text.
## Details
This is an ~~almost complete~~ implementation of the approach described
by emilk [in this
comment](<https://github.com/emilk/egui/issues/3086#issuecomment-1724205777>),
excluding CoW semantics for `LayoutJob` (but including them for `Row`).
It supersedes the previous unsuccessful attempt here:
https://github.com/emilk/egui/pull/4000.
Draft because:
- [X] ~~Currently individual rows will have `ends_with_newline` always
set to false.
This breaks selection with Ctrl+A (and probably many other things)~~
- [X] ~~The whole block for doing the splitting and merging should
probably become a function (I'll do that later).~~
- [X] ~~I haven't run the check script, the tests, and haven't made sure
all of the examples build (although I assume they probably don't rely on
Galley internals).~~
- [x] ~~Layout is sometimes incorrect (missing empty lines, wrapping
sometimes makes text overlap).~~
- A lot of text-related code had to be changed so this needs to be
properly tested to ensure no layout issues were introduced, especially
relating to the now row-relative coordinate system of `Row`s. Also this
requires that we're fine making these very breaking changes.
It does significantly improve the performance of rendering large blocks
of text (if they have many newlines), this is the test program I used to
test it (adapted from <https://github.com/emilk/egui/issues/3086>):
<details>
<summary>code</summary>
```rust
use eframe::egui::{self, CentralPanel, TextEdit};
use std::fmt::Write;
fn main() -> Result<(), eframe::Error> {
let options = eframe::NativeOptions {
..Default::default()
};
eframe::run_native(
"editor big file test",
options,
Box::new(|_cc| Ok(Box::<MyApp>::new(MyApp::new()))),
)
}
struct MyApp {
text: String,
}
impl MyApp {
fn new() -> Self {
let mut string = String::new();
for line_bytes in (0..50000).map(|_| (0u8..50)) {
for byte in line_bytes {
write!(string, " {byte:02x}").unwrap();
}
write!(string, "\n").unwrap();
}
println!("total bytes: {}", string.len());
MyApp { text: string }
}
}
impl eframe::App for MyApp {
fn update(&mut self, ctx: &egui::Context, _frame: &mut eframe::Frame) {
CentralPanel::default().show(ctx, |ui| {
let start = std::time::Instant::now();
egui::ScrollArea::vertical().show(ui, |ui| {
let code_editor = TextEdit::multiline(&mut self.text)
.code_editor()
.desired_width(f32::INFINITY)
.desired_rows(40);
let response = code_editor.show(ui).response;
if response.changed() {
println!("total bytes now: {}", self.text.len());
}
});
let end = std::time::Instant::now();
let time_to_update = end - start;
if time_to_update.as_secs_f32() > 0.5 {
println!("Long update took {:.3}s", time_to_update.as_secs_f32())
}
});
}
}
```
</details>
I think the way to proceed would be to make a new type, something like
`PositionedRow`, that would wrap an `Arc<Row>` but have a separate `pos`
~~and `ends_with_newline`~~ (that would mean `Row` only holds a `size`
instead of a `rect`). This type would of course have getters that would
allow you to easily get a `Rect` from it and probably a `Deref` to the
underlying `Row`.
~~I haven't done this yet because I wanted to get some opinions whether
this would be an acceptable API first.~~ This is now implemented, but of
course I'm still open to discussion about this approach and whether it's
what we want to do.
Breaking changes (currently):
- The `Galley::rows` field has a different type.
- There is now a `PlacedRow` wrapper for `Row`.
- `Row` now uses a coordinate system relative to itself instead of the
`Galley`.
* Closes <https://github.com/emilk/egui/issues/3086>
* [X] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Enabled the `missing_assert_message` lint
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Lucas Meurer <lucasmeurer96@gmail.com>
Breaking change!
* `Rounding` -> `CornerRadius`
* `rounding` -> `corner_radius`
This is to:
* Clarify
* Conform to other systems (e.g. Figma)
* Avoid confusion with `GuiRounding`
## Defining what `Rounding` is
This PR defines what `Rounding` means: it is the corner radius of
underlying `RectShape` rectangle. If you use `StrokeKind::Inside`, this
means the rounding is of the outer part of the stroke. Conversely, if
you use `StrokeKind::Outside`, the stroke is outside the rounded
rectangle, so the stroke has an inner radius or `rounding`, and an outer
radius that is larger by `stroke.width`.
This definitions is the same as Figma uses.
## Improving general shape rendering
The rendering of filled shapes (rectangles, circles, paths, bezier) has
been rewritten. Instead of first painting the fill with the stroke on
top, we now paint them as one single mesh with shared vertices at the
border. This has several benefits:
* Less work (faster and with fewer vertices produced)
* No overdraw (nicer rendering of translucent shapes)
* Correct blending of stroke and fill
The logic for rendering thin strokes has also been improved, so that the
width of a stroke of `StrokeKind::Outside` never affects the filled area
(this used to be wrong for thin strokes).
## Improving of rectangle rendering
Rectangles also has specific improvements in how thin rectangles are
painted.
The handling of "Blur width" is also a lot better, and now works for
rectangles with strokes.
There also used to be bugs with specific combinations of corner radius
and stroke width, that are now fixed.
## But why?
With the new `egui::Scene` we end up with a lot of zoomed out shapes,
with sub-pixel strokes. These need to look good! One thing led to
another, and then I became obsessive 😅
## Tessellation Test
In order to investigate the rendering, I created a Tessellation Test in
the `egui_demo_lib`.
[Try it
here](https://egui-pr-preview.github.io/pr/5669-emilkimprove-tessellator)
This is a breaking change, requiring users to think about wether the
stroke is inside/centered/outside the rect.
When in doubt, add `egui::StrokeKind::Inside` to the function call.
Adds `RectShape::stroke_kind` so you can select if the stroke goes
inside, outside, or is centered on the rectangle.
Also adds `RectShape::round_to_pixels` so you can override
`TessellationOptions::round_rects_to_pixels`.
* Part of https://github.com/emilk/egui/issues/4019
As part of the work on adding a custom `Border` to everything, I want to
make sure that the size of `RectShape`, `Frame` and the future `Border`
is kept small (for performance reasons).
This PR changes the storage of the corner radius of rectangles from four
`f32` (one for each corner) into four `u8`. This mean the corner radius
can only be an integer in the range 0-255 (in ui points). This should be
enough for most people.
If you want to manipulate rounding using `f32`, there is a new
`Roundingf` to fill that niche.
* Merge this first: https://github.com/emilk/egui/pull/5517
This aligns all rectangles and (horizontal or vertical) line segments to
the physical pixel grid in the `epaint::Tessellator`, making these
shapes appear crisp everywhere.
* Closes https://github.com/emilk/egui/issues/5164
* Closes https://github.com/emilk/egui/issues/3667
This undoes a lot of the explicit, egui-side aligning added in:
* https://github.com/emilk/egui/pull/4943
The new approach has several benefits over the old one:
* It is done automatically by epaint, so it is applied to everything (no
longer opt-in)
* It is applied after any layer transforms (so it always works)
* It makes line segments crisper on high-DPI screens
* All filled rectangles now has sides that end on pixel boundaries
Hey! I am not sure if this is something that's been considered before
and decided against (I couldn't find any PR's or issues).
This change removes the internal profiling macros in library crates and
the `puffin` feature and replaces it with similar functions in the
[profiling](https://github.com/aclysma/profiling) crate. This crate
provides a layer of abstraction over various profiler instrumentation
crates and allows library users to pick their favorite (supported)
profiler.
An additional benefit for puffin users is that dependencies of egui are
included in the instrumentation output too (mainly wgpu which uses the
profiling crate), so more details might be available when profiling.
A breaking change is that instead of using the `puffin` feature on egui,
users that want to profile the crate with puffin instead have to enable
the `profile-with-puffin` feature on the profiling crate. Similarly they
could instead choose to use `profile-with-tracy` etc.
I tried to add a 'tracy' feature to egui_demo_app in order to showcase ,
however the /scripts/check.sh currently breaks on mutually exclusive
features (which this introduces), so I decided against including it for
the initial PR. I'm happy to iterate more on this if there is interest
in taking this PR though.
Screenshot showing the additional info for wgpu now available when using
puffin
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
- I fixed the TODO to use the `log` crate instead of `eprintln`
- Set the rust-version in the `scripts/check.sh` to the same as egui is
on
- I made xtask use anyhow to remove some unwraps
* [x] I have followed the instructions in the PR template
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes <https://github.com/emilk/egui/issues/4776>
* [x] I have followed the instructions in the PR template
I've been meaning to look into this for a while but finally bit the
bullet this week. Contrary to what I initially thought, the problem of
blurry lines is unrelated to feathering because it also happens with
feathering disabled.
The root cause is that lines tend to land on pixel boundaries, and
because of that, frequently used strokes (e.g. 1pt), end up partially
covering pixels. This is especially noticeable on 1ppp displays.
There were a couple of things to fix, namely: individual lines like
separators and indents but also shape strokes (e.g. Frame).
Lines were easy, I just made sure we round them to the nearest pixel
_center_, instead of the nearest pixel boundary.
Strokes were a little more complicated. To illustrate why, here’s an
example: if we're rendering a 5x5 rect (black fill, red stroke), we
would expect to see something like this:
The fill and the stroke to cover entire pixels. Instead, egui was
painting the stroke partially inside and partially outside, centered
around the shape’s path (blue line):
Both methods are valid for different use-cases but the first one is what
we’d typically want for UIs to feel crisp and pixel perfect. It's also
how CSS borders work (related to #4019 and #3284).
Luckily, we can use the normal computed for each `PathPoint` to adjust
the location of the stroke to be outside, inside, or in the middle.
These also are the 3 types of strokes available in tools like Photoshop.
This PR introduces an enum `StrokeKind` which determines if a
`PathStroke` should be tessellated outside, inside, or _on_ the path
itself. Where "outside" is defined by the directions normals point to.
Tessellator will now use `StrokeKind::Outside` for closed shapes like
rect, ellipse, etc. And `StrokeKind::Middle` for the rest since there's
no meaningful "outside" concept for open paths. This PR doesn't expose
`StrokeKind` to user-land, but we can implement that later so that users
can render shapes and decide where to place the stroke.
### Strokes test
(blue lines represent the size of the rect being rendered)
`Stroke::Middle` (current behavior, 1px and 3px are blurry)
`Stroke::Outside` (proposed default behavior for closed paths)
`Stroke::Inside` (for completeness but unused at the moment)
### Demo App
The best way to review this PR is to run the demo on a 1ppp display,
especially to test hover effects. Everything should look crisper. Also
run it in a higher dpi screen to test that nothing broke 🙏.
Before:
After (notice the sharper lines):
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I removed (I hope so) all wildcard imports I found.
For me on my pc this improved the build time:
- for egui -5s
- for eframe -12s
* [x] I have followed the instructions in the PR template
Removes `egui_assert` etc and replaces it with normal `debug_assert`
calls.
Previously you could opt-in to more runtime checks using feature flags.
Now these extra runtime checks are always enabled for debug builds.
You are most likely to encounter them if you use negative sizes or NaNs
or other similar bugs.
These usually indicate bugs in user space.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
remove repetitive words
Signed-off-by: hardlydearly <799511800@qq.com>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
I had to make a couple types not Copy because closures, but it should'nt
be a massive deal.
I tried my best to make the API change as non breaking as possible.
Anywhere a PathStroke is used, you can just use a normal Stroke instead.
As mentioned above, the bezier paths couldn't be copy anymore, but IMO
that's a minor caveat.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
This is mostly a refactor, but has some performance benefits:
* We (re)use the same tessellator as for everything else, leading to
less allocations
* We cull shapes before rendering them
Adding `RectShape::blur_width` means it can also be used for other
effects, such as glow.
* Part of https://github.com/emilk/egui/issues/1485
This adds a `rayon` feature to `epaint` and `egui` to parallelize
tessellation of large shapes, such as high-resolution plot lines.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
This PR simply allows you to override the opacity of a Galley when you
draw it on screen. Last year I opened #3548 and some changes were
requested to the PR, but unfortunately school got really busy and I
wasn't able to apply them. This PR supersedes #3548 and applys the
changes requested in that PR
Closes#3548
This introduces a special `Color32::PLACEHOLDER` which, during text
painting, will be replaced with `TextShape::fallback_color`.
The fallback color is mandatory to set in all text painting. Usually
this comes from the current visual style.
This lets users color only parts of a `WidgetText` (using e.g. a
`LayoutJob` or a `Galley`), where the uncolored parts (using
`Color32::PLACEHOLDER`) will be replaced by a default widget color (e.g.
blue for a hyperlink).
For instance, you can color the `⚠️`-emoji red in a piece of text red
and leave the rest of the text uncolored. The color of the rest of the
text will then depend on wether or not you put that text in a label, a
button, or a hyperlink.
Overall this simplifies a lot of complexity in the code but comes with a
few breaking changes:
* `TextShape::new`, `Shape::galley`, and `Painter::galley` now take a
fallback color by argument
* `Shape::galley_with_color` has been deprecated (use `Shape::galley`
instead)
* `Painter::galley_with_color` has been deprecated (use
`Painter::galley` instead)
* `WidgetTextGalley` is gone (use `Arc<Galley>` instead)
* `WidgetTextJob` is gone (use `LayoutJob` instead)
* `RichText::into_text_job` has been replaced with
`RichText::into_layout_job`
* `WidgetText::into_text_job` has been replaced with
`WidgetText::into_layout_job`
* Move scroll bar spacing settings to a `struct ScrollSpacing`
* Add a demo for changing scroll bar appearance
* Add setting for ScrollBarVisibility in demo
* Add `#[inline]` to a `ScrollArea` builder methods
* Refactor how scroll bar show/hide is computed
* Add support for floating scroll bars
* Tweak color and opacity of the scroll handle
* Allow allocating a fixed size even for floating scroll bars
* Add three pre-sets of scroll bars: solid, thin, floating
* Use floating scroll bars as the default
* Fix id-clash with bidir scroll areas
* Improve demo
* Fix doclink
* Remove reset button from demo
* Fix doclinks
* Fix visual artifact with thin rounded rectangles
* Fix doclink
* typos
* Imoprove docs for callback shapes
* Improve docs for loader traits
* Use snake_case for feature `all_loaders`
* Make loaders publix
* Slightly better error message on image load failure
* Improve image loading error messages
* Use `bytes://` schema for included bytes loader
* Try user loaders first
* Move `image_loading_spinners` to `Visuals`
* Unify and simplify code
* Make the main text of `Button` optional
This largely makes ImageButton obsolete
* Fix docstrings
* Better docs
* typos
* Use the more explicit `egui_extras::install_image_loaders`
* Simplify `Image::paint_at` function
Emil Ernerfeldt
Hubert Głuchowski
Hubert Głuchowski
Nicolas
Pēteris Pakalns
Ted de Munnik
lucasmerlin
Juan Campa
hardlydearly
Joe Sorensen
Eris
StratusFearMe21
Jozef Číž
lictex_