* Closes https://github.com/emilk/egui/issues/1918
* Closes https://github.com/emilk/egui/issues/4437
* Closes https://github.com/emilk/egui/issues/4709
* [x] I have followed the instructions in the PR template
Hiya,
I need new winit for a specific fix for a android_native_actvity. There
are already two PRs, but both don't seem to have a lot of movement, or
are entirely complete:
https://github.com/emilk/egui/pull/4466
Seems to have gone stale & is missing some bits.
https://github.com/emilk/egui/pull/4702
Also seems stale (if less so), and is missing a refactor to
run_on_demand. I also *think* the accesskit integration has a mistake
and can't be enabled. I've marked them as a co-author on this as I
started from this branch. (I think! Haven't done that on git before...).
Sorry for the wall of text but just dumping some details / thoughts
here:
- There's an issue with creating child windows in winit 0.30.1 and up on
macOS. The multiple_viewports, "create immediate viewport" example
crashes on anything later 0.30.1, with a stack overflow in unsafe code.
I've create [a winit
issue](https://github.com/rust-windowing/winit/issues/3800), it *might*
already be fixed in 0.31.0 but I can't test as 0.31 will likely require
another refactoring. For now I have just pinned things to 0.30.0 exatly.
- Winit has deprecated run_on_demand, instead requiring the
ApplicationHandler interface. In 0.31.0 run_on_demand is removed. I've
refactored both the integration and the WinitApp trait to follow this
pattern. I've left user_events a bit more opaque, as it seems 0.31.0 is
doing a rework of UserEvents too.
- I've used the new lazy init approach for access kit from this branch
https://github.com/mwcampbell/egui/tree/accesskit-new-lazy-init and
marked Matt as co-author, thanks Matt!
- There was very similair but not quite the same code for run_and_return
and run_and_exit. I've merged them, but looking at the github issues
graveyard it seems vey finnicky. I *hope* this is more robust than
before but it's a bit scary.
- when receiving new_events this also used to check the redraw timing
dictionary. That doesn't seem necesarry so left this out, but that is a
slight behaviour change?
- I have reeneabled serial_windows on macOS. I wondered whether it was
fixed after this PR and does seem to be! However, even before this PR it
seems to work, so maybe winit has sorted things out before that...
Windows also works fine now without the extra hack.
- I've done a very basic test of AccessKit on Windows and screen reader
seems ok but I'm really not knowleadgable enough to say whether it's all
good or not.
- I've tested cargo tests & all examples on Windows & macOS, and ran a
basic Android app. Still, testing native platforms is wel... hard so if
anyone can test linux / iOs / older mac versions / windows 10 would
probably be a good idea!
- For consistencys sake I've made all event like functions in WinitApp
return a `Result<EventResult>`. There's quite a bit of Ok-wrapping now,
maybe too annoying? Not sure.
Thank you for having a look!
# Tested on
* [x] macOS
* [x] Windows
* [x] Wayland (thanks [SiebenCorgie](https://github.com/SiebenCorgie))
* [x] X11 (thanks
[crumblingstatue](https://github.com/crumblingstatue)!,
[SiebenCorgie](https://github.com/SiebenCorgie))
# TODO
* [x] Fix "follow system theme" not working on initial startup (winit
issue, pinning to 0.30.2 for now).
* [x] Fix `request_repaint_after`
---------
Co-authored-by: mwcampbell <mattcampbell@pobox.com>
Co-authored-by: j-axa <josef.axa@gmail.com>
Co-authored-by: DataTriny <datatriny@gmail.com>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
0.20 has a bunch of bugs that will be fixed by:
* https://github.com/gfx-rs/wgpu/pull/5681
At Rerun, we don't want to wait for the wgpu 0.20.1 patch release before
we update egui, so we will temporarily downgrade to wgpu 0.19
After reverting I'll open a new PR that will update to 0.20 again, with
the intention of merging that once 0.20.1 is released.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Related to #3482
Not sure what the "best practice" is, to me it seems like one should
import from "the original location" if possible, but now it should at
least be possible to not re-export ahash without any breakage in the
egui code base (but possibly in projects using egui, so one should
probably deprecate it if one would like to go that path). It also seems
like epaint re-exports ahash.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Inspired by:
44d65f41ac/Cargo.toml (L65)
I took the liberty of removing that comment since I *think* that I got
all "relevant" ones (showing up more than once, sort of).
updates the wgpu version to 0.20 and changes the API calls accordingly.
I had to update wasm-bindgen to "0.2.92". Otherwise, I got this error
for the demo app:
```
error: failed to select a version for `wasm-bindgen`.
... required by package `js-sys v0.3.69`
... which satisfies dependency `js-sys = "^0.3.69"` of package `eframe v0.27.2 (/home/user/Projects/egui/crates/eframe)`
... which satisfies path dependency `eframe` (locked to 0.27.2) of package `confirm_exit v0.1.0 (/home/user/Projects/egui/examples/confirm_exit)`
versions that meet the requirements `^0.2.92` are: 0.2.92
all possible versions conflict with previously selected packages.
previously selected package `wasm-bindgen v0.2.90`
... which satisfies dependency `wasm-bindgen = "=0.2.90"` of package `egui_demo_app v0.27.2 (/home/user/Projects/egui/crates/egui_demo_app)`
failed to select a version for `wasm-bindgen` which could resolve this conflict
```
Why is it locked to this version right now?
I ran the tests, checked the web demo and my own projects, and
everything seems to work fine with wgpu 0.20.
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
`glyphon` requires the screen resolution during the `prepare` stage, and
passing that to the callback's `prepare` function seems pretty trivial.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Exposes support in both glow and wgpu for texture wrap modes
This would be breaking for manual creations of TextureOptions but would
work with the current TextureOptions::NEAREST and LINEAR without change,
keeping those clamp to edge
I wasn't sure how best to expose the options to the user and added
consts for LINEAR_REPEAT LINEAR_MIRRORED_REPEAT NEAREST_REPEAT
NEAREST_MIRRORED_REPEAT
This does not include wrap mode clamp to border as it worked fine with
glow but with wgpu it panics due to Features
Features(ADDRESS_MODE_CLAMP_TO_BORDER) are required but not enabled on
the device, and I thought it was probably best not to try to enable that
feature, but happy to include that functionality also if that is okay to
be toggled
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Closes https://github.com/emilk/egui/issues/3941
Workspace dependencies can be annoying.
If you don't set them to `default-features=false`, then you cannot opt
out of their default features anywhere else, and get warnings if you
try.
So you set `default-features=false`, and then you need to manually opt
in to the default features everywhere else.
Or, as in my case, don't.
I don't have the energy to do this tonight, so I'll just revert.
This should help slightly with CPU/GPU parallelism when vsync is on.
I also return the time spent on vsync, which can help users figure out
how much CPU wall-time was used on non-vsync stuff
This makes all `wgpu` features opt-in for `egui-wgpu` users.
For `eframe`, I opted to enable some `wgpu` features so users can still
use `eframe` without having to also opt-in to extra ewgpu features
(eframe is batteries-included).
Setting `desired_maximum_frame_latency` to a low value should
theoretically lead to lower latency in winit apps using `egui-wgpu`
(e.g. in `eframe` with `wgpu` backend).
* Replaces https://github.com/emilk/egui/pull/3714
* See also https://github.com/gfx-rs/wgpu/pull/4899
----
It seems like `desired_maximum_frame_latency` has no effect on my Mac. I
lowered my monitor refresh-rate to 30Hz to test, and can see no
difference between `desired_maximum_frame_latency` of `0` or `3`.
Before when experimenting with changing the global `DESIRED_NUM_FRAMES`
in `wgpu` I saw a huge difference, so I wonder what has changed.
I verified that `set_maximum_drawable_count` is being called with either
`1` or `2`, but I perceive no difference between the two.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to add commits to your PR.
* Remember to run `cargo fmt` and `cargo cranky`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Closes#3759
Compiled changelog below:
- On X11, fix Xft.dpi reload during runtime.
- On X11, fix window minimize.
- On Web, fix context menu not being disabled by
with_prevent_default(true).
- On Wayland, fix WindowEvent::Destroyed not being delivered after
destroying window.
- Fix EventLoopExtRunOnDemand::run_on_demand not working for consequent
invocation
- On macOS, remove spurious error logging when handling Fn.
- On X11, fix an issue where floating point data from the server is
- misinterpreted during a drag and drop operation.
- On X11, fix a bug where focusing the window would panic.
- On macOS, fix refresh_rate_millihertz.
- On Wayland, disable Client Side Decorations when wl_subcompositor is
not supported.
- On X11, fix Xft.dpi detection from Xresources.
- On Windows, fix consecutive calls to
window.set_fullscreen(Some(Fullscreen::Borderless(None))) resulting in
losing previous window state when eventually exiting fullscreen using
window.set_fullscreen(None).
- On Wayland, fix resize being sent on focus change.
- On Windows, fix set_ime_cursor_area.
Useful when debugging, e.g. if the default choice is one of many, and
perhaps the other ones would be better.
**EDIT**: Oh, `enumerate_adapters` doesn't work on web… will fix.
* Fixes https://github.com/rerun-io/rerun/issues/4297
* tested against a very hasty and incomplete port of egui/trunk, found
[here](https://github.com/rerun-io/rerun/tree/andreas/experimental-egui-trunk)
In rare cases in can happen that the viewport returned by
`PaintCallbackInfo` is outside the bounds of the screen.
for at least [wgpu/webgpu in
particular](https://www.w3.org/TR/webgpu/#dom-gpurenderpassencoder-setviewport)
this is invalid usage, other backends might be affected as well.
Since this happened due to a float rounding error (in one repro case I
had I got (width==1126.5625) + (offset=715.4376) = 1842.0001 for a
resolution of 1842) I decided to do away with fractional values on the
viewport alltogether. They _technically_ make sense since a viewport is
only specifying the NDC to pixel coordinate conversion, but practically
this may lead to surprising sub-sampling issues.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Introduced in the recent multi-viewports work, we accidentally recreated
the wgpu surfaces every frame. This is now fixed.
I found this while improving the profiling of `eframe`
* Closes#1044
---
(new PR description written by @emilk)
## Overview
This PR introduces the concept of `Viewports`, which on the native
eframe backend corresponds to native OS windows.
You can spawn a new viewport using `Context::show_viewport` and
`Cotext::show_viewport_immediate`.
These needs to be called every frame the viewport should be visible.
This is implemented by the native `eframe` backend, but not the web one.
## Viewport classes
The viewports form a tree of parent-child relationships.
There are different classes of viewports.
### Root vieport
The root viewport is the original viewport, and cannot be closed without
closing the application.
### Deferred viewports
These are created with `Context::show_viewport`.
Deferred viewports take a closure that is called by the integration at a
later time, perhaps multiple times.
Deferred viewports are repainted independenantly of the parent viewport.
This means communication with them need to done via channels, or
`Arc/Mutex`.
This is the most performant type of child viewport, though a bit more
cumbersome to work with compared to immediate viewports.
### Immediate viewports
These are created with `Context::show_viewport_immediate`.
Immediate viewports take a `FnOnce` closure, similar to other egui
functions, and is called immediately. This makes communication with them
much simpler than with deferred viewports, but this simplicity comes at
a cost: whenever tha parent viewports needs to be repainted, so will the
child viewport, and vice versa. This means that if you have `N`
viewports you are poentially doing `N` times as much CPU work. However,
if all your viewports are showing animations, and thus are repainting
constantly anyway, this doesn't matter.
In short: immediate viewports are simpler to use, but can waste a lot of
CPU time.
### Embedded viewports
These are not real, independenant viewports, but is a fallback mode for
when the integration does not support real viewports. In your callback
is called with `ViewportClass::Embedded` it means you need to create an
`egui::Window` to wrap your ui in, which will then be embedded in the
parent viewport, unable to escape it.
## Using the viewports
Only one viewport is active at any one time, identified wth
`Context::viewport_id`.
You can send commands to other viewports using
`Context::send_viewport_command_to`.
There is an example in
<https://github.com/emilk/egui/tree/master/examples/multiple_viewports/src/main.rs>.
## For integrations
There are several changes relevant to integrations.
* There is a [`crate::RawInput::viewport`] with information about the
current viewport.
* The repaint callback set by `Context::set_request_repaint_callback`
now points to which viewport should be repainted.
* `Context::run` now returns a list of viewports in `FullOutput` which
should result in their own independant windows
* There is a new `Context::set_immediate_viewport_renderer` for setting
up the immediate viewport integration
* If you support viewports, you need to call
`Context::set_embed_viewports(false)`, or all new viewports will be
embedded (the default behavior).
## Future work
* Make it easy to wrap child viewports in the same chrome as
`egui::Window`
* Automatically show embedded viewports using `egui::Window`
* Use the new `ViewportBuilder` in `eframe::NativeOptions`
* Automatically position new viewport windows (they currently cover each
other)
* Add a `Context` method for listing all existing viewports
Find more at https://github.com/emilk/egui/issues/3556
---
<details>
<summary>
Outdated PR description by @konkitoman
</summary>
## Inspiration
- Godot because the app always work desktop or single_window because of
embedding
- Dear ImGui viewport system
## What is a Viewport
A Viewport is a egui isolated component!
Can be used by the egui integration to create native windows!
When you create a Viewport is possible that the backend do not supports
that!
So you need to check if the Viewport was created or you are in the
normal egui context!
This is how you can do that:
```rust
if ctx.viewport_id() != ctx.parent_viewport_id() {
// In here you add the code for the viewport context, like
egui::CentralPanel::default().show(ctx, |ui|{
ui.label("This is in a native window!");
});
}else{
// In here you add the code for when viewport cannot be created!
// You cannot use CentralPanel in here because you will override the app CentralPanel
egui::Window::new("Virtual Viewport").show(ctx, |ui|{
ui.label("This is without a native window!\nThis is in a embedded viewport");
});
}
```
This PR do not support for drag and drop between Viewports!
After this PR is accepted i will begin work to intregrate the Viewport
system in `egui::Window`!
The `egui::Window` i want to behave the same on desktop and web
The `egui::Window` will be like Godot Window
## Changes and new
These are only public structs and functions!
<details>
<summary>
## New
</summary>
- `egui::ViewportId`
- `egui::ViewportBuilder`
This is like winit WindowBuilder
- `egui::ViewportCommand`
With this you can set any winit property on a viewport, when is a native
window!
- `egui::Context::new`
- `egui::Context::create_viewport`
- `egui::Context::create_viewport_sync`
- `egui::Context::viewport_id`
- `egui::Context::parent_viewport_id`
- `egui::Context::viewport_id_pair`
- `egui::Context::set_render_sync_callback`
- `egui::Context::is_desktop`
- `egui::Context::force_embedding`
- `egui::Context::set_force_embedding`
- `egui::Context::viewport_command`
- `egui::Context::send_viewport_command_to`
- `egui::Context::input_for`
- `egui::Context::input_mut_for`
- `egui::Context::frame_nr_for`
- `egui::Context::request_repaint_for`
- `egui::Context::request_repaint_after_for`
- `egui::Context::requested_repaint_last_frame`
- `egui::Context::requested_repaint_last_frame_for`
- `egui::Context::requested_repaint`
- `egui::Context::requested_repaint_for`
- `egui::Context::inner_rect`
- `egui::Context::outer_rect`
- `egui::InputState::inner_rect`
- `egui::InputState::outer_rect`
- `egui::WindowEvent`
</details>
<details>
<summary>
## Changes
</summary>
- `egui::Context::run`
Now needs the viewport that we want to render!
- `egui::Context::begin_frame`
Now needs the viewport that we want to render!
- `egui::Context::tessellate`
Now needs the viewport that we want to render!
- `egui::FullOutput`
```diff
- repaint_after
+ viewports
+ viewport_commands
```
- `egui::RawInput`
```diff
+ inner_rect
+ outer_rect
```
- `egui::Event`
```diff
+ WindowEvent
```
</details>
### Async Viewport
Async means that is independent from other viewports!
Is created by `egui::Context::create_viewport`
To be used you will need to wrap your state in `Arc<RwLock<T>>`
Look at viewports example to understand how to use it!
### Sync Viewport
Sync means that is dependent on his parent!
Is created by `egui::Context::create_viewport_sync`
This will pause the parent then render itself the resumes his parent!
#### ⚠️ This currently will make the fps/2 for every sync
viewport
### Common
#### ⚠️ Attention
You will need to do this when you render your content
```rust
ctx.create_viewport(ViewportBuilder::new("Simple Viewport"), | ctx | {
let content = |ui: &mut egui::Ui|{
ui.label("Content");
};
// This will make the content a popup if cannot create a native window
if ctx.viewport_id() != ctx.parent_viewport_id() {
egui::CentralPanel::default().show(ctx, content);
} else {
egui::Area::new("Simple Viewport").show(ctx, |ui| {
egui::Frame::popup(ui.style()).show(ui, content);
});
};
});
````
## What you need to know as egui user
### If you are using eframe
You don't need to change anything!
### If you have a manual implementation
Now `egui::run` or `egui::begin` and `egui::tessellate` will need the
current viewport id!
You cannot create a `ViewportId` only `ViewportId::MAIN`
If you make a single window app you will set the viewport id to be
`egui::ViewportId::MAIN` or see the `examples/pure_glow`
If you want to have multiples window support look at `crates/eframe`
glow or wgpu implementations!
## If you want to try this
- cargo run -p viewports
## This before was wanted to change
This will probably be in feature PR's
### egui::Window
To create a native window when embedded was set to false
You can try that in viewports example before:
[78a0ae8](78a0ae879e)
### egui popups, context_menu, tooltip
To be a native window
</details>
---------
Co-authored-by: Konkitoman <konkitoman@users.noreply.github.com>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
Co-authored-by: Pablo Sichert <mail@pablosichert.com>
Tested on M1 Mac:
* native
* webgl, firefox
* webgpu, chrome
all looking normal
Updated minor ahash version because 0.8.1 got yanked. Added some deny
exceptions for now - we'll have to update winit soon to resolve glow
related cargo deny errors (not a big issue though since we don't expect
wgpu and glow backends to be used at the same time)
* eframe README: explain how to enable copy/paste
* Implement Debug for a couple of structs
* Code cleanup
* Better docs
* profile ron serialization
* CI: Allow "exclude from changelog" as the only label
* Imoprove docs for callback shapes
* Improve docs for loader traits
* Use snake_case for feature `all_loaders`
* Make loaders publix
* Slightly better error message on image load failure
* Improve image loading error messages
* Use `bytes://` schema for included bytes loader
* Try user loaders first
* Move `image_loading_spinners` to `Visuals`
* Unify and simplify code
* Make the main text of `Button` optional
This largely makes ImageButton obsolete
* Fix docstrings
* Better docs
* typos
* Use the more explicit `egui_extras::install_image_loaders`
* Simplify `Image::paint_at` function
* add egui logo to widget gallery
* improve "no image loaders" error message
* rework static URIs to accept `Cow<'static>`
* remove `RetainedImage` from `http_app` in `egui_demo_app`
* hide `RetainedImage` from docs
* use `ui.image`/`Image` over `RawImage`
* remove last remanant of `RawImage`
* remove unused doc link
* add style option to disable image spinners
* use `Into<Image>` instead of `Into<ImageSource>` to allow configuring the underlying image
* propagate `image_options` through `ImageButton`
* calculate image size properly in `Button`
* properly calculate size in `ImageButton`
* Update crates/egui/src/widgets/image.rs
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* improve no image loaders error message
* add `size()` helper to `TexturePoll`
* try get size from poll in `Button`
* add `paint_at` to `Spinner`
* use `Spinner::paint_at` and hover on image button response
* `show_spinner` -> `show_loading_spinner`
* avoid `allocate_ui` in `Image` when painting spinner
* make icon smaller + remove old texture
* add `load_and_calculate_size` + expose `paint_image_at`
* update `egui_plot` to paint image in the right place
* Add helpers for painting an ImageSource directly
* Use max_size=INF as default
* Use new API in WidgetGallery
* Make egui_demo_app work by default
* Remove Option from scale
* Refactor ImageSize
* Fix docstring
* Small refactor
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Add puffin profile scopes to the startup and running of eframe
* puffin_profiler example: start puffin right away
* cargo format let-else statements
* More profile scopes
* Add some `#[inline]`
* Standardize puffin profile scope definitions
* standardize again
* Silence warning when puffin is disabled
* Improved wgpu callbacks
* update documentation on egui_wgpu callbacks
* make shared callback resource map pub
* make it nicer to create epaint::PaintCallback from egui_wgpu callback
* constrain ClippedPrimitive lifetime to outlive wgpu::RenderPass
* Revert callback resources to TypeMap, put finish_prepare on callback trait
* doc string fixes
* Bump `wgpu` to 0.17.0
This required bumping wasm-bindgen to 0.2.87
* cargo deny exception for `foreign-types`
* sort deny.toml
* Add fragile-send-sync-non-atomic-wasm feature to wgpu
* cargo deny: ignore children of foreign-types
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Triage for GL backend
* And cargo-fmt
* Changelog update with PR and issue
* Update crates/eframe/src/epi/mod.rs
Co-authored-by: Andreas Reich <r_andreas2@web.de>
* Update crates/egui-wgpu/src/winit.rs
Co-authored-by: Andreas Reich <r_andreas2@web.de>
* Add "supports_screenshot" to surface state
* Cranky fix
* fmt
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
* Log warning instead of error when failing to decode RON in storage
* New web demo
* Clean up some warn/error logging
* Avoid deadlock that could happen on crash
* Log errors using console.warn, because console.error can cause crashes
* Use patched version of wasm-bindgen-cli, allowing >2GB memory
* New web demo
* Make wgpu webgl/gles opt-in (but still work out of the box via feature flag), workaround canvas creation issue
* missing allow unsafe code annotations
* add breaking change not to eframe release notes
* Add --webgpu flag to build_demo_web.sh
* Improve CHANGELOG docs
* Clean up, and prepare for having to wasm:s
* put canvas without workaround under `if false`
* fix spelling
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Replace tracing crate with log
It's just so much simpler to use
* Add `bacon wasm` job
* eframe: add a WebLogger for piping log events to the web console
* [egui-wgpu] Do vertex & index buffer in a single copy each
Also, copy uniform buffer only if necessary.
Previously, we did hundreds of small copies via queue.write_buffer which would create a new buffer for each of these copies. Now, there are only two gpu sided copy operations and the memory goes directly to the staging buffer.
In a quick debug test on Rerun this decreased time for the `update_buffer` method from about 0.87ms to 0.37ms!
* fix comparing padding on UniformBuffer in wgpu renderer
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Support for transparent backbuffer in wgpu winit binding
Choose best fitting composite alpha mode on the fly.
* Compilation fix
* Add line to eframe CHANGELOG
* Attempt to mollify CI: try different way to install apt packages
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Update to winit 0.28
Mac trackpads pinch gestures will now generate `egui::Event::Zoom`
* Update accesskit_winit
* Try to get Android CI green
* Fix wayland compilation
* Add comment about android-activity
* Update changelogs
* Fix call to register_xlib_error_hook
* Clear color values are not explicitely sent to the rendering backend as-is.
Previously, converting from Color32 to Rgba caused an srgb->linear conversion. This conversion is incorrect if the backbuffer doesn't perform automatic conversion from linear->srgb (lack of this conversion is generally what egui assumes!).
* fill in pr numbers in changelog
* Epi comment fix
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* Color32 comment fix
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* move changelog line
* rename fix
* use backticks in doc
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
* eframe::run_native: return errors instead of crashing
* Detect and handle glutin errors
* egui_demo_app: silence wgpu log spam
* Add trace logs for why eframe is shutting down
* Fix: only save App state once on Mac
* Handle Winit failure
* Log where we load app state from
* Don't panic on zero-sized window
* Clamp loaded window size to not be too tiny to see
* Simplify code: more shared code in window_builder
* Improve code readability
* Fix wasm32 build
* fix android
* Update changelog
* Add depth stencil initialization to `Painter`
* Move depth stencil initialization into `resize_and_generate_depth_texture_view`, and call it in `set_window` and `on_window_resized`
* Allow for depth texture in WASM builds
* change `map` to `if let` statement
* use reference for render state
* Clean up descriptors and move texture generation to on resize events
* remove unused field from WebOptions
Andreas Reich
Arthur Brussee
Simon Niedermayr
Joe Sorensen
Jonas Wagner
Emil Ernerfeldt
Oscar Gustafsson
StratusFearMe21
Dan Lock
YgorSouza
Madeline Sparkles
Daniel Buch Hansen
Fredrik Fornwall
Konkitoman
Jan Procházka
Aaron Hill
mauliu
amfaber
Niklas Korz
Jozef Číž
Pēteris Pakalns
Red Artist
Ryan Hileman
Lukas Hermann