make it easier to add fonts.
For example if I want to add a custom FontFamily or if the user wants to
add a Chinese fallback
* [x] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
winit::Window::inner_size returns size of safe area on iOS. use
winit::Window::outer_size on iOS
The dimensions of outer_size include the title bar and borders, but as
far as I know there is no way to actually display the title bar or
borders on iOS so it should be fine.
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* Closes#3547
* [X] I have followed the instructions in the PR template
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
This shortcut was previously triggering the Undo action due to the
matches_logically method ignoring the state of the Shift key. This was
solved by simply inverting the order of the undo and redo arms, so the
undo is not matched if the shortcut corresponds to redo.
* Closes <https://github.com/emilk/egui/issues/5255>
* [x] I have followed the instructions in the PR template
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
Run this code
```rs
CentralPanel::default().show(ctx, |ui| {
Sides::new().show(
ui,
|ui| {
ui.label("1");
},
|ui| {
ui.label("2");
},
);
Sides::new().show(
ui,
|ui| {
ui.label("11");
},
|ui| {
ui.label("22");
},
);
Sides::new().show(
ui,
|ui| {
ui.label("111");
},
|ui| {
ui.label("222");
},
);
});
```
Before
After
This should hopefully make it easier for egui contributors and
egui_kittest users to understand the snapshot tests
* [X] I have followed the instructions in the PR template
- closes#3491
- closes#3926
This adds a testing library to egui based on
[kittest](https://github.com/rerun-io/kittest). Kittest is a new
[AccessKit](https://github.com/AccessKit/accesskit/)-based testing
library. The api is inspired by the js
[testing-library](https://testing-library.com/) where the idea is also
to query the dom based on accessibility attributes.
We made kittest with egui in mind but it should work with any rust gui
framework with AccessKit support.
It currently has support for:
- running the egui app, frame by frame
- building the AccessKit tree
- ergonomic queries via kittest
- via e.g. get_by_name, get_by_role
- simulating events based on the accesskit node id
- creating arbitrary events based on Harness::input_mut
- rendering screenshots via wgpu
- snapshot tests with these screenshots
A simple test looks like this:
```rust
fn main() {
let mut checked = false;
let app = |ctx: &Context| {
CentralPanel::default().show(ctx, |ui| {
ui.checkbox(&mut checked, "Check me!");
});
};
let mut harness = Harness::builder().with_size(egui::Vec2::new(200.0, 100.0)).build(app);
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::False));
checkbox.click();
harness.run();
let checkbox = harness.get_by_name("Check me!");
assert_eq!(checkbox.toggled(), Some(Toggled::True));
// You can even render the ui and do image snapshot tests
#[cfg(all(feature = "wgpu", feature = "snapshot"))]
egui_kittest::image_snapshot(&egui_kittest::wgpu::TestRenderer::new().render(&harness), "readme_example");
}
```
~Since getting wgpu to run in ci is a hassle, I'm taking another shot at
creating a software renderer for egui (ideally without a huge dependency
like skia)~ (this didn't work as well as I hoped and it turns out in CI
you can just run tests on a mac runner which comes with a real GPU)
Here is a example of a failed snapshot test in ci, it will say which
snapshot failed and upload an artifact with the before / after and diff
images:
https://github.com/emilk/egui/actions/runs/11183049487/job/31090724606?pr=5166
* Closes#5224
I'm unfamiliar with wgpu, so I'd like someone to confirm, that calling
`wgpu::Texture` _after_ `wgpu::Queue::submit` is in fact the right thing
to do.
---------
Co-authored-by: Andreas Reich <r_andreas2@web.de>
Fixes#5174.
The drag velocity was not being updated unless the cursor counted as
"dragging", which only happens when it's in motion. This effectively
guarantees that the drag velocity will never be zero, even if the cursor
is not moving, and results in spurious scroll velocity being applied
when the cursor is released.
Instead, we update the velocity only when the drag is stopped, which is
when the kinetic scrolling actually needs to begin. Note that we
immediately *apply* the scroll velocity on the same frame that we first
set it, to avoid a 1-frame gap where the scroll area doesn't move.
I believe that *not* setting `scroll_stuck_to_end` and `offset_target`
when the drag is released is the correct thing to do, as they should
apply immediately once the user stops dragging. Should we maybe clear
the drag velocity instead if `scroll_stuck_to_end` is true or
`offset_target` exists?
* Closes#5174
* [x] I have followed the instructions in the PR template
This adds a new `Ui::unique_id` used in `Ui::response`.
I'll make a follow-up PR where the old `id` is renamed `stable_id`, and
deprecate `fn id` to force users to think through which `id` they want.
* Closes https://github.com/emilk/egui/issues/5190
Since ui's initial sound is a "y", it should be "a ui", not "an ui".
Replaced case-sensitively using regex `([aA])n ([uU][iI])` replacement
`$1 $2`
* [x] I have followed the instructions in the PR template
This will allow disabling the animation that occurs during
`scroll_to_row` calls. Follows the same coding style as the other scroll
options in `TableBuilder`.
---------
Co-authored-by: Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
It cannot be made const with the current version of Rust, and that is
counterintuitive since it does compile-time checks, so we make that
clear in the documentation. It might be possible to make it const once
MSRV is bumped to 1.82.
* See <https://github.com/emilk/egui/issues/5160>
* [x] I have followed the instructions in the PR template
Affects `.on_hover_text(…)` with dynamic content (i.e. content that
changes over time).
* Closes https://github.com/emilk/egui/issues/5167
`.on_hover_ui` with dynamic content can still hit the shrinking problem.
The general solution depends on solving
https://github.com/emilk/egui/issues/5138 but a work-around is to add
this to your tooltips:
```diff
response.on_hover_ui(|ui| {
+ ui.set_max_width(ui.spacing().tooltip_width);
// …
});
```
* Closes https://github.com/emilk/egui/pull/5106
* Closes https://github.com/emilk/egui/issues/5084
Protect against rounding errors in egui layout code.
Say the user asks to wrap at width 200.0.
The text layout wraps, and reports that the final width was 196.0
points.
This than trickles up the `Ui` chain and gets stored as the width for a
tooltip (say).
On the next frame, this is then set as the max width for the tooltip,
and we end up calling the text layout code again, this time with a wrap
width of 196.0.
Except, somewhere in the `Ui` chain with added margins etc, a rounding
error was introduced,
so that we actually set a wrap-width of 195.9997 instead.
Now the text that fit perfectly at 196.0 needs to wrap one word earlier,
and so the text re-wraps and reports a new width of 185.0 points.
And then the cycle continues.
So this PR limits the text wrap-width to be an integer.
Related issues:
* https://github.com/emilk/egui/issues/4927
* https://github.com/emilk/egui/issues/4928
* https://github.com/emilk/egui/issues/5163
---
Pleas test this @rustbasic
A very common usability issue on egui-wgpu callbacks is that `paint`
can't access any data that doesn't strictly outlive the callback
resources' data. E.g. if the callback resources have an `Arc` to some
resource manager, you can't easily pull out resources since you
statically needed to ensure that those resource references outlived the
renderpass, whose lifetime was only constrained to the callback
resources themselves.
Wgpu 22 no longer has this restriction! Its (render/compute-)passes take
care of the lifetime of any passed resource internally. The lifetime
constraint is _still_ opt-out since it protects from a common runtime
error of adding commands/passes on the parent encoder while a previously
created pass wasn't closed yet.
This is not a concern in egui-wgpu since the paint method where we have
to access the render pass doesn't even have access to the encoder!
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Adds support for mipmaps in the `glow` backend.
Should be possible to implement for `wgpu` in the future as well, but
requires a custom compute kernel.
This adds preview deployments that will deploy a version of
egui_demo_app for each pull request, making things easier to review /
test.
Some notes on security:
The preview deployment is split in two workflows, preview_build and
preview_deploy.
`preview_build` runs on pull_request, so it won't have any access to the
repositories secrets, so it is safe to
build / execute untrusted code.
`preview_deploy` has access to the repositories secrets (so it can push
to the pr preview repo) but won't run
any untrusted code (it will just extract the build artifact and push it
to the pages branch where it will
automatically be deployed).
To set this up, a DEPLOY_KEY secret needs to be added, which allows the
action to push the compiled artifacts into this repository:
https://github.com/egui-pr-preview/pr
The deploy key is the private key part of a key generated via
ssh-keygen. The public key is set as a deploy key in that repo.
I have created the repo on a separate github org, so it won't be
directly associated with emil or egui in case someone pushes something
naughty.
I have set this up in my fork of egui to show how this works:
- I created a PR: https://github.com/lucasmerlin/egui/pull/2
- The code will be compiled and pushed to the egui-pr-preview/pr repo
and deployed via github pages
- The bot leaves a comment on the pr with a link to the preview
- The preview is available at
https://egui-pr-preview.github.io/pr/2-pr-preview-demo/
(It's unfortunately only available a couple seconds after the bot writes
the comment, because the pages deployment action is run independently on
the other repository)
- Once the PR is merged / closed the preview will be cleaned up
(unfortunately the empty folder will remain, it seems like it's not
possible to remove that via the JamesIves/github-pages-deploy-action
action I use, but I don't think that it's a big issue)
I'll leave the PR in draft until the DEPLOY_KEY is set up
<!--
Please read the "Making a PR" section of
[`CONTRIBUTING.md`](https://github.com/emilk/egui/blob/master/CONTRIBUTING.md)
before opening a Pull Request!
* Keep your PR:s small and focused.
* The PR title is what ends up in the changelog, so make it descriptive!
* If applicable, add a screenshot or gif.
* If it is a non-trivial addition, consider adding a demo for it to
`egui_demo_lib`, or a new example.
* Do NOT open PR:s from your `master` branch, as that makes it hard for
maintainers to test and add commits to your PR.
* Remember to run `cargo fmt` and `cargo clippy`.
* Open the PR as a draft until you have self-reviewed it and run
`./scripts/check.sh`.
* When you have addressed a PR comment, mark it as resolved.
Please be patient! I will review your PR, but my time is limited!
-->
* [x] I have followed the instructions in the PR template
Hi, I've made an integration that allows egui to be embedded as a widget
inside of a GTK application. I'm planning to use it to draw interactive
plots via `egui_plot`, as I haven't found comparable plotting widgets in
GTK. I hope others will find this integration useful as well.
The library doesn't do its own rendering, it instead relies on
`egui_glow` to render inside of a GTK-provided OpenGL drawing area.
It is published on [crates.io](https://crates.io/crates/gtk-egui-area).
YgorSouza
frederik-uni
lucasmerlin
Emil Ernerfeldt
zhatuokun
Justin Whear
rustbasic
Rusty-Cube
Nicolas
valadaptive
GiGaGon
Ethan Post
Andreas Reich
Christofer Nolander
Swarkin
Ilya Zlobintsev